How To Pick The Perfect Replacement Power Washer Gun
Even with the best intentions, stuff happens: the spray gun that went into the ...
Local Pickup FAQ's
Hover to zoom
1 of 1
+
Share This Product
Recommended Accessories
Expert Recommended Accessories
Selected by Jim, our Expert
Optional Accessories
7
$13.99
Factory-Direct
Model: PWMV19
$31.99
Factory-Direct
Model: 900035M
$13.99
Factory-Direct
Model: 900040M
$13.99
Factory-Direct
Model: 900045M
$13.99
Factory-Direct
Model: 900050M
$13.99
Factory-Direct
Model: 900055M
$13.99
Factory-Direct
Features
Grade
Professional
Style
Gas
Inflow
3/8" Threaded (Female)
Outflow
Wet Sandblast
- Industrial Wet Sandblaster For Abrasive Cleaning
- For suction-fed injection of sand into the water stream
- Nozzles are made of tungsen carbide
- Aluminum 2' sand probe
- Parts Included:
- 2 metal hose clamps
- 1" diameter adjustable sand intake
- 25' polyurethane sand hose
- 2 Way Valve System (2 ports)
- Port 1 (1/4" female threaded plug) input
- Port 2 water/sand nozzle (10/16" x 3/16" retangular hole) output
- 1/4" Female Outlet For 5° - 10° Meg Nozzles
- 4 IMEG 5° spray angle nozzles included: .03, .04, .05, and .06
- The higher your GPM, the larger number nozzle you should use
California residents see
Warning: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP) which is known to the State of California to cause Cancer, and Lead which is known to the State of California to cause Developmental Harm.
For more information go to: www.p65Warnings.ca.gov
Specifications
AL-TPS450KIT
Spray Gun
Turbo Nozzle
Sold Separately
General Information
Product Category
Pressure Washer Accessories
Overview
Product Category
Pressure Washer Accessories
Weight
15 Pounds
Consumer Warranty
1 Year
Product Length
28 Inches
Product Width
12 Inches
Product Height
11 Inches
UPC
192216371408
Hose
Hose Length
25 Feet
Hose Material
Polyurethane
Accessories
Accessory Grade
Professional
Accessory Style
Gas
Inflow
3/8" Threaded (Female)
Outflow
Wet Sandblast
Rated PSI
6500 PSI
Reviews
(3)
AR North America AL-TPS450KIT Reviews & Ratings
Good Product
By Dave P.
Seal Beach, California
Purchased 08/06/2019 |
Review Posted 09/23/2019
My workers love it.
Dave P. Recommends This
Was this review helpful?
Rating Breakdown
5/5
5/5
5/5
5/5
Tips to avoid clogging sand & understanding tip replacement
By Pete W.
Florence, Alabama
Review Posted 08/10/2012
Two quick points:
1. Rig a cheap 5 gallon bucket with the sand hose coming out the bottom to feed your wet sandblaster. Elevate the sand bucket to enlist gravitys work in feeding sand to your blaster, hanging by bucket handle. Keep the top covered to minimize water and debris contaminating your sand. When possible, keep the sand hose entry to the wand ABOVE the wand to avoid water entering the sand hose. When this is not possible during the blasting, instruct operator that he should minimize time spent with sand hose on lower side, especially when his trigger is not activated.
2. The tip is a consumable, just like the blasting media. If you think the tip wears out excessively, compare the cost of replacing the tip to the alternative method of dry blasting with expensive media. Remember that cheap sand is ok in wet blasting- no dust, but cannot be used with dry blasting due to silicosis from sand particles in the resulting dust.
Replacing tips in wet blasting with cheap sand may be cost effective compared to longer lasting tips when dry blasting with expensive media and remember to add in clean up cost of media, which may differ with cheap wet sand vs dry media and dust.
1. Rig a cheap 5 gallon bucket with the sand hose coming out the bottom to feed your wet sandblaster. Elevate the sand bucket to enlist gravitys work in feeding sand to your blaster, hanging by bucket handle. Keep the top covered to minimize water and debris contaminating your sand. When possible, keep the sand hose entry to the wand ABOVE the wand to avoid water entering the sand hose. When this is not possible during the blasting, instruct operator that he should minimize time spent with sand hose on lower side, especially when his trigger is not activated.
2. The tip is a consumable, just like the blasting media. If you think the tip wears out excessively, compare the cost of replacing the tip to the alternative method of dry blasting with expensive media. Remember that cheap sand is ok in wet blasting- no dust, but cannot be used with dry blasting due to silicosis from sand particles in the resulting dust.
Replacing tips in wet blasting with cheap sand may be cost effective compared to longer lasting tips when dry blasting with expensive media and remember to add in clean up cost of media, which may differ with cheap wet sand vs dry media and dust.
Was this review helpful?
Rating Breakdown
4/5
4/5
4/5
4/5
Painting projects.
By Sterling G.
Huntsville, Alabama
Purchased 05/18/2012 |
Review Posted 07/24/2012
I am a Department Manager with the Von Braun Center in Huntsville AL. We are a multi purpose, convention, entertainment, sports facility. We have an inhouse maintenance department which takes care of the facility HVAC, electrical, plumbing, and structural aspects of the facility.
We recently purchased a PressurePro Model E404HC, 400PSI rated pressure washer, from Pressure Washers Direct at a reasonable price. We will use this pressure washer for many differant projects, but we will primarily use it to prep for exterior painting projects. We have been using the pressure waher for a couple of months now and it seems to be performing well. This pressure washer has the honda engine and cat pump which seems to be a good combination.
We also purchased an AR industrial sandblasting kit to use with the pressur washer. I have never attempted sandblasting in this manner before. We decided to give it a try, so we wouldnt have to rent an air compressor and sandblasting rig, but it didnt work out very well for us. The sandblasting nozzle wore out pretty quickly, and the wand clogged with wet sand quite frequently.
As we were not experianced in sandblasting in this manner, and we really didnt receive any operating tips with the wand, I suppose it is possible we may have been doing something incorrectly. In the long run we decided to do our sandblasting in the traditional manner. Although the sandblasting wand didnt work out for us, I believe the pressure washer will continue to perform well.
We recently purchased a PressurePro Model E404HC, 400PSI rated pressure washer, from Pressure Washers Direct at a reasonable price. We will use this pressure washer for many differant projects, but we will primarily use it to prep for exterior painting projects. We have been using the pressure waher for a couple of months now and it seems to be performing well. This pressure washer has the honda engine and cat pump which seems to be a good combination.
We also purchased an AR industrial sandblasting kit to use with the pressur washer. I have never attempted sandblasting in this manner before. We decided to give it a try, so we wouldnt have to rent an air compressor and sandblasting rig, but it didnt work out very well for us. The sandblasting nozzle wore out pretty quickly, and the wand clogged with wet sand quite frequently.
As we were not experianced in sandblasting in this manner, and we really didnt receive any operating tips with the wand, I suppose it is possible we may have been doing something incorrectly. In the long run we decided to do our sandblasting in the traditional manner. Although the sandblasting wand didnt work out for us, I believe the pressure washer will continue to perform well.
Was this review helpful?
Rating Breakdown
3/5
3/5
3/5
3/5
Product Q&A
(1)
Product Questions
Answered by Jim, the Pressure Washer Expert
I've got a 3000PSI 3GPM unit and I would like to use the unit as a wet sodablaster. What would be the best suited tip. And do you have any suggestion as to the PSI I should be running the unit at? I will be cleaning rough concrete of stains & paint. And an open grille aluminum roll up door.
Dru
from
September 29, 2011
How-To Articles
How to Pressure Wash A Garbage Can
The smell of a dirty garbage can is notorious for its gag-inducing effects. The...
How to Pick the Perfect Replacement Hose
High-pressure hoses take a heck of a beating from the pressurized water they co...
Power Equipment How-To Library
Articles, Tips and Buying Guides from Our Experts
Ask A Question!
*Required Fields
+
Thank You For Submitting Your Question
Your submission has been sent successfully. Please give our experts up to two business days to respond.
Media Gallery
AR Industrial Sand Blasting Kit w/Fan Spray and Sand Poker
Customer Review Images
