How To Pick The Perfect Replacement Power Washer Gun
Even with the best intentions, stuff happens: the spray gun that went into the ...
Local Pickup FAQ's
+
Share This Product
Recommended Accessories
Expert Recommended Accessories
Selected by Jim, our Expert
Optional Accessories
5
Model: AWA060-WS
$48.00
In-Stock
Model: PWMV19
$31.99
Factory-Direct
Model: AL-TPS450KIT
$499.99
Factory-Direct
Model: D10010
$16.99
Factory-Direct
Model: DWSDBTK
$142.99
Factory-Direct
Features
Grade
Consumer
Style
Gas
Inflow
1/4" Snap Coupler (Male)
Outflow
Wet Sandblast
- Wet Sandblaster For Abrasive Cleaning
- For suction-fed injection of sand into water stream
- Maximum Working Pressure 3500 PSI
- Minimum working pressure 1500 PSI
- Maximum flow rate 8 GPM; minumum flow rate 3 GPM
- Maximum rated temperature 200°F
- Parts Included:
- 20' polyurethane hose 1/4" diameter; outlet;
- 16" Aluminum sand wand; mixing nozzle & seal
- 24" Water/Sand Outlet (3 Ports)
- Port 1: gun connection (1/4" male quick-connect plug) 18" Input
- Port 2: sand wand connection 5" angled lance input
- Port 3: rubber water/sand nozzle holder (6/16" circular) output
- Handles Several Sizes & Types Of Media
- Permanent nozzle included
- A PDF download with instructions can be found under the Specs Tab
- Works With Many Brands Of Pressure Washer
California residents see
Warning: This product can expose you to chemicals including Lead which is known to the State of California to cause Developmental Harm.
For more information go to: www.p65Warnings.ca.gov
Specifications
DSDBK1
Spray Gun
Spray Gun Connection
Quick-Connect
General Information
Product Category
Pressure Washer Accessories
Overview
Product Category
Pressure Washer Accessories
Weight
4.2 Pounds
Consumer Warranty
90 Days
Product Length
24 Inches
Product Width
12 Inches
Product Height
4 Inches
UPC
682491013440
Hose
Hose Material
Polyurethane
Hose Diameter
1/4 Inch
Accessories
Accessory Grade
Consumer
Accessory Style
Gas
Inflow
1/4" Snap Coupler (Male)
Outflow
Wet Sandblast
Minimum GPM
Minimum GPM
Gallon per Minute
3.0
Rated PSI
3500 PSI
Reviews
(15)
General Pump DSDBK1 Reviews & Ratings
Customer Photos and Videos
Customer Rating
3.47
(15 Ratings)
5
(5)
(5)4(4)
(4)3(2)
(2)2(1)
(1)1(3)
(3)
Does The Job
By Cory S.
Mount sherman, Kentucky
Purchased 05/15/2020 |
Review Posted 06/05/2020
Wanted this due to my air compressor is only a 30 gallon didn’t want to run it constantly so I watched a video on YouTube people sandblasting with water worked well just not with finer abrasives. It didn’t come with different size tips, it’s rather large and better for heavier bigger abrasives I also was having to constantly move the end that sucks up the media cause it was using so much so quickly I went through 100lbs of media underneath a 48inch Mowing deck but it was more fine than what I should have been using.
Cory S. Recommends This
Was this review helpful?
Rating Breakdown
3/5
5/5
4/5
5/5
Pros:
Id Buy It Again, Easy To Use, Exceeded Expectations, Reliable
Cons:
End nozzle was bigger then what I needed
Fantastic Performance
By William M.
Wakefield, Rhode Island
Purchased 06/18/2018 |
Review Posted 07/10/2018
This attachment works great. I blasted the rims on my wife's Honda CR-V, took the rust and cleaned them beautifully.
Also took off my trailer hitch on my pickup, blasted off heavy corrosion, cleaned up nicely.
Just make sure your sand is dry, dry, dry.
Also took off my trailer hitch on my pickup, blasted off heavy corrosion, cleaned up nicely.
Just make sure your sand is dry, dry, dry.
William M. Recommends This
Was this review helpful?
Rating Breakdown
5/5
5/5
5/5
5/5
Pros:
I'd Buy It Again, Easy To Use, Exceeded Expectations, High Quality
Good Product
By David P.
Appling, Georgia
Purchased 11/01/2017 |
Review Posted 11/26/2017
Good product. Much more effective with high GPM pressure washers.(3 gpm +)
David P. Recommends This
Was this review helpful?
Rating Breakdown
4/5
5/5
4/5
3/5
Pros:
I'd Buy It Again, Easy To Use, Durable, Reliable
Cons:
Expensive
Pleased With Performance, Quality, & Company Response
By Brian S.
Laurel, Delaware
Purchased 02/10/2017 |
Review Posted 03/06/2017
I have only had a chance to make a test use of the sandblast attachment. I used about 15 to 20 lbs of sand. My pressure washer is rated 2.3 GPM at 2700 psi so I expected poor results, however I'm happy to say it performed as well as I hoped and better than expected.
Deep heavy rust on a metal patio table took some time to remove but it did it. Paint and light surface rust was removed easily and quickly. I had no problems with plugging.
I have two sets of metal patio furniture to clean and expect it will do that well. I'm quite happy with my purchase.
Deep heavy rust on a metal patio table took some time to remove but it did it. Paint and light surface rust was removed easily and quickly. I had no problems with plugging.
I have two sets of metal patio furniture to clean and expect it will do that well. I'm quite happy with my purchase.
Brian S. Recommends This
Was this review helpful?
Rating Breakdown
4/5
5/5
5/5
5/5
Pros:
Easy To Use, Exceeded Expectations, High Quality, I'd Buy It Again
Absolute Best Thing
By Matthew G.
Stewartstown, New Hampshire
Purchased 04/12/2016 |
Review Posted 05/03/2016
ABSOLUTE best thing I have ever purchased in my life. I restore old jeeps, dunebuggies, tractors, and farm equipment. It is a shame i did not know these existed before i started restoring. I will never never never dry sand outside of a self contained unit again!
With one of these you have 10x the removing power and surface area over a dry air unit. There is NO dust!! I stripped an entire jeep frame in 5 minutes with a t-shirt, gloves, and pair of sunglasses!
No dust
No sand in my hair
No huge protection suit
No air breather mask
I don't even have a nice pressure washer. It is a 3gpm 2500psi pump, however the pump froze and cracked. Most the water and pressure leaks out of the pump but it still BLOWS THE RUST away with this kit.
With one of these you have 10x the removing power and surface area over a dry air unit. There is NO dust!! I stripped an entire jeep frame in 5 minutes with a t-shirt, gloves, and pair of sunglasses!
No dust
No sand in my hair
No huge protection suit
No air breather mask
I don't even have a nice pressure washer. It is a 3gpm 2500psi pump, however the pump froze and cracked. Most the water and pressure leaks out of the pump but it still BLOWS THE RUST away with this kit.
Matthew G. Recommends This
Was this review helpful?
Rating Breakdown
5/5
5/5
5/5
5/5
Pros:
Durable, Easy To Use, Exceeded Expectations, I'd Buy It Again
Works Well
By Randy S.
Arkansas
Purchased 02/17/2016 |
Review Posted 03/10/2016
I have a Snap-On 2700psi pressure washer with a less than desirable Chinese engine that had running issues since new.
With that said...The sand blaster attachment worked out of the box. I was told by others to have sand entering from top to prevent clogs from water backup. A hundred times less splash-back of material over dry method.
It is a bit of a sand hog but a moot point considering the speed, ease and cleanliness of paint/rust removal. I would recommend to anyone with a 2000+psi pressure washer that wanted to sandblast anything.
P.S.
The fly ash variety of media has less sharpness when dampened. Regular sand or expensive cutting media cuts best.
With that said...The sand blaster attachment worked out of the box. I was told by others to have sand entering from top to prevent clogs from water backup. A hundred times less splash-back of material over dry method.
It is a bit of a sand hog but a moot point considering the speed, ease and cleanliness of paint/rust removal. I would recommend to anyone with a 2000+psi pressure washer that wanted to sandblast anything.
P.S.
The fly ash variety of media has less sharpness when dampened. Regular sand or expensive cutting media cuts best.
Randy S. Recommends This
Was this review helpful?
Rating Breakdown
5/5
5/5
5/5
5/5
When it works it works well.
By John
Georgia
Review Posted 07/02/2015
Bought this unit to blast the deck of my lawnmower to do welding and repainting repairs.
When this works it works well. Since it uses water, don't even think about using Soda products.
The Quikrete play sand is good for a mild abrasive. If you need to cut rust and paint then you will need something more aggressive. Black Diamond 20/40 coal slag works very well. Tractor Supply carries it.
This is supposedly made by General Pump. I needed an o-ring for the water nozzle part (there are 2) NOT THE BLAST NOZZLE(there is 1). The General Pump rep said he only shows one o-ring and was useless. He lied and said they made this product. How can they make it and A)not KNOW there are 3 o-rings and B)not sell said o-rings.
After some Googling I FOUND who I think is the manufacturer of this product and an exploded view that SHOWS the 3 o-rings.
http://pressurejet.com/systemlistingdetail/172/I/Ts2-05-Sand-Blaster-Brass-Pjs.aspx
Will try and find something close at HD or Lowe's to replace the damaged o-ring.
TRICKS TO THIS UNIT:
Blast vertically when possible. NEVER set the wand down without it being completely vertical or water WILL trickle into the suction line and then you will be breaking it down and cleaning it and drying everything. PIA!
When you do need to blast horizontally then make sure the suction line is ON TOP pointing toward the sky or it will once again get water in the media/suction line and you have to clean it.
With practice you will learn how to use this thing for up to a half hour without stopping to clean it out.
One other thing....shorten the hose when you buy it if you are not pulling media or pulling slowly. It works on venturi vacuum so if you have a pump that's a bit small shortening the hose will help tremendously.
My pump is 3100psi @ 2.5gpm and i took 5 feet off the hose and it works a LOT better now.
When this works it works well. Since it uses water, don't even think about using Soda products.
The Quikrete play sand is good for a mild abrasive. If you need to cut rust and paint then you will need something more aggressive. Black Diamond 20/40 coal slag works very well. Tractor Supply carries it.
This is supposedly made by General Pump. I needed an o-ring for the water nozzle part (there are 2) NOT THE BLAST NOZZLE(there is 1). The General Pump rep said he only shows one o-ring and was useless. He lied and said they made this product. How can they make it and A)not KNOW there are 3 o-rings and B)not sell said o-rings.
After some Googling I FOUND who I think is the manufacturer of this product and an exploded view that SHOWS the 3 o-rings.
http://pressurejet.com/systemlistingdetail/172/I/Ts2-05-Sand-Blaster-Brass-Pjs.aspx
Will try and find something close at HD or Lowe's to replace the damaged o-ring.
TRICKS TO THIS UNIT:
Blast vertically when possible. NEVER set the wand down without it being completely vertical or water WILL trickle into the suction line and then you will be breaking it down and cleaning it and drying everything. PIA!
When you do need to blast horizontally then make sure the suction line is ON TOP pointing toward the sky or it will once again get water in the media/suction line and you have to clean it.
With practice you will learn how to use this thing for up to a half hour without stopping to clean it out.
One other thing....shorten the hose when you buy it if you are not pulling media or pulling slowly. It works on venturi vacuum so if you have a pump that's a bit small shortening the hose will help tremendously.
My pump is 3100psi @ 2.5gpm and i took 5 feet off the hose and it works a LOT better now.
John Does Not Recommend This
Was this review helpful?
Rating Breakdown
3/5
3/5
2/5
4/5
Finally...something that works as advertised
By David M.
Clarence, New York
Purchased 05/27/2015 |
Review Posted 06/18/2015
Using this with 4000psi Karcher pump and running the real Black Beauty extra fine sand as BB recommends. This thing REALLY removes paint, powder coat and rust without distortion. I must warn you though...it's messy! If you do steel be prepared by having some zinc phosphate readily available (Afterblast from Eastwood) to address the flash rust you will get.
It makes for an excellent prep surface for paint and powdercoat. Last comment is that I turned the suction nipple 180 deg for the suction hose follows the washer wand where I zip tie it to keep that part higher than the nozzle to avoid clogging.
It makes for an excellent prep surface for paint and powdercoat. Last comment is that I turned the suction nipple 180 deg for the suction hose follows the washer wand where I zip tie it to keep that part higher than the nozzle to avoid clogging.
David M. Recommends This
Was this review helpful?
Rating Breakdown
4/5
4/5
5/5
4/5
Uninformed sales person
By Brian Smith
Wrightstown, Wisconsin
Purchased 08/01/2014 |
Review Posted 08/23/2014
Sales person sold me nozzles and this gun dos not have a changeable nozzle. Should have sent it back right away and got a better one.
Brian Smith Does Not Recommend This
Was this review helpful?
Expert Response
It's the professional model DWSDBTK that has the interchangeable nozzles that fit inside the nozzle holder.
If you'd like to give us a call, toll free, at 1- (866) 618-9274 we'll be happy to set up a return for you, and help place the order for the other sandblaster if you'd like.
We appreciate your business and apologize for any inconvenience!
If you'd like to give us a call, toll free, at 1- (866) 618-9274 we'll be happy to set up a return for you, and help place the order for the other sandblaster if you'd like.
We appreciate your business and apologize for any inconvenience!
Dale V.
Power Equipment Expert
Rating Breakdown
1/5
1/5
1/5
1/5
Cons:
Low Quality, Difficult To Use, Unreliable, Durability
Did not work
By Joel
Simi Valley, California
Review Posted 10/24/2013
I'm assuming my pressure washer lacks enough PSI (1000 psi) or, I'm not using the sandblaster as designed. there were no instructions so, I bought some all purpose bags of sand, stuck the metal end into the bucket of sand. The bucket filled up with water and no sand was propelled.
The water stream was about as strong as a weak garden hose because the opening is very large. Maybe 1/4". This device must need way more pressure than I have. Just to be fair to the people that make it, I'm sure it works fine with the right setup.
The water stream was about as strong as a weak garden hose because the opening is very large. Maybe 1/4". This device must need way more pressure than I have. Just to be fair to the people that make it, I'm sure it works fine with the right setup.
Joel Does Not Recommend This
Was this review helpful?
Expert Response
The folks at General Pump didn't give us a minimum PSI, but since it's rated up to 3500 PSI it may work best in the 2400 PSI and up range.
Dale V.
Power Equipment Expert
Rating Breakdown
1/5
5/5
1/5
1/5
Product Q&A
(2)
Product Questions
Answered by Jim, the Pressure Washer Expert
I have an Ex-cell XR2750 pressure washer; rated at 2750 psi @ 2.5 gpm. Will I be able to use either the General Pump 3500 PSI Sandblasting Kit or the General Pump 5500 PSI Sandblasting Kit or do I need a different pressure washer?
Matt
from Florida
January 10, 2013
Hi, will the General Pump 3500 PSI Sandblasting Kit work with an electric power washer?
Dan
from Virginia
September 19, 2011
How-To Articles
How to Pressure Wash A Garbage Can
The smell of a dirty garbage can is notorious for its gag-inducing effects. The...
How to Pick the Perfect Replacement Hose
High-pressure hoses take a heck of a beating from the pressurized water they co...
Power Equipment How-To Library
Articles, Tips and Buying Guides from Our Experts
Manuals
DSDBK1
Ask A Question!
*Required Fields
+
Thank You For Submitting Your Question
Your submission has been sent successfully. Please give our experts up to two business days to respond.
Media Gallery
General Pump 3500 PSI Sandblasting Kit
Customer Review Images
