How To Pick The Perfect Replacement Power Washer Gun
Even with the best intentions, stuff happens: the spray gun that went into the ...
Local Pickup FAQ's
Hover to zoom
1 of 1
+
Share This Product
Recommended Accessories
Expert Recommended Accessories
Selected by Jim, our Expert
Required Accessories
9
These accessories are required to properly setup/install this product.
Optional Accessories
10
Features
Grade
Prosumer
Style
Gas
Inflow
3/8" Snap Coupler (Female)
Outflow
3/8" Snap Coupler (Male)
- Apply Soap At Low Pressure
- Increase your pressure washer's effectiveness
- Spray soap with a black spray tip
- Chemical Does Not Run Through The Pump
- Allows for a wider choice of chemicals
- Heavy Duty Construction
- Durable and long lasting
- Includes 4 feet of hose with strainer
- Quick Connect To Your Pump
- Connect after pump, before 3/8" high pressure hose
- Easy to snap on, snap off
- 4000 PSI maximum at 3-5 GPM
- Fixed 80 / 20 dilution ratio
*Weather-Related Shipping Delay Notice* Please be advised that due to recent inclement weather, the facility is operating at limited capacity. PED has no control over lead times on pressure washer products coming out of Florida.
Product Note
This is designed to work with pumps with a male quick connect plug on the pump outlet, if you have a female couple on the pump, you will need to switch the quick connects on the injector.
California residents see
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
For more information go to: www.p65Warnings.ca.gov
Specifications
AC1005
Spray Gun
Spray Gun Connection
Quick-Connect
Pump
Adjustable Pressure
No
Chemical Injection
Down-Stream
General Information
Product Category
Pressure Washer Accessories
Overview
Product Category
Pressure Washer Accessories
Weight
1 Pound
Made in USA
No
Consumer Warranty
90 Days
UPC
00871924004869
Additional Model Numbers
ACI005, AC1005
Accessories
Accessory Grade
Prosumer
Accessory Style
Gas
Inflow
3/8" Snap Coupler (Female)
Outflow
3/8" Snap Coupler (Male)
Minimum GPM
Minimum GPM
Gallon per Minute
3
Maximum GPM
Maximum GPM
Gallon per Minute
5
Rated PSI
4000 PSI
Reviews
(14)
Pressure-Pro AC1005 Reviews & Ratings
Customer Photos and Videos
Great Product
By James M.
Virginia
Purchased 06/30/2023 |
Review Posted 07/25/2023
Very study, works great, very happy.
James M. Recommends This
Was this review helpful?
Rating Breakdown
5/5
5/5
5/5
5/5
Pros:
Easy To Use, I39d Buy It Again
Cons:
None
Soap Like Crazy
By Dan W.
Ohio
Purchased 05/10/2023 |
Review Posted 05/18/2023
This chemical injector is the best I've ever run across in 30 yrs. It applies a vigorous amount in a short period. It will empty out a 5 gallon bucket in no time. Avoid adjuster chemical injectors.
Dan W. Recommends This
Was this review helpful?
Rating Breakdown
5/5
5/5
5/5
5/5
Pros:
Price, I39d Buy It Again, Reliable, Exceeded Expectations
Cons:
None
It's The Best Chemical Injector I Have Ever Purchased
By Steven S.
Herriman, Utah
Purchased 08/24/2021 |
Review Posted 09/17/2021
Great job in providing such a great piece of hardware. I own a pressure washing company in Utah and by far this injector makes my day so much easier knowing it's reliable
Steven S. Recommends This
Was this review helpful?
Rating Breakdown
5/5
5/5
5/5
5/5
Pros:
Durable, Easy To Use, Light Weight, High Quality
Great But Backward
By Carlo F.
oxford, Florida
Purchased 02/27/2021 |
Review Posted 03/22/2021
Everything was great. As soon as I flipped the injector the right way. Came in backwards and didn’t work for me till I figured out what happened.
Carlo F. Recommends This
Was this review helpful?
Rating Breakdown
5/5
5/5
5/5
5/5
Pros:
Id Buy It Again
Cons:
Assembled Backwards
Works Great Assembled Backward
By Ryan D.
Windsor Locks, Connecticut
Purchased 09/06/2020 |
Review Posted 09/12/2020
Worked great after I took it apart and put it together correctly!!! Was back feeding chemical tank cause whoever assembled it did backwards!! Check flow arrows before using!
Ryan D. Recommends This
Was this review helpful?
Rating Breakdown
5/5
1/5
5/5
5/5
Pros:
Durable, Price, Id Buy It Again
Cons:
Assembled Backwards
Very Good Surface Washer
By John B.
Forked River, New Jersey
Purchased 06/19/2020 |
Review Posted 07/17/2020
Great product--Purchased a second one in case original should break.
So far did not need new downstream. Original one that came with washerhas held up. Performed many washers and still working fine.
So far did not need new downstream. Original one that came with washerhas held up. Performed many washers and still working fine.
John B. Recommends This
Was this review helpful?
Rating Breakdown
5/5
5/5
5/5
5/5
Pros:
Durable, Id Buy It Again
Good Injector ...BUT...Check The Assembly
By Aram D.
Woburn, Massachusetts
Purchased 04/10/2019 |
Review Posted 04/28/2019
I would have given this injector 5 stars across the board, except that the unit I received was assembled backwards. I was able to correct it on-site, but it cost me a bit of time. Check the assembly and flow direction before rolling out for the day. That said, I'll likely purchase another when this one gets crusty in the next month or so.
Aram D. Recommends This
Was this review helpful?
Rating Breakdown
4/5
4/5
5/5
4/5
Pros:
Price, I'd Buy It Again
Cons:
Assembled Backwards
Very Disappointed With Product
By Willie M.
Midway, Florida
Purchased 09/05/2018 |
Review Posted 10/03/2018
I am very disappointed with this product it did not work.
Willie M. Does Not Recommend This
Was this review helpful?
Expert Response
We are sorry to hear the ACI005 - Pressure-Pro Low Pressure 4000 PSI Chemical Suction Injector is not working correctly for you. To get the flow established you will need to make sure the soap is thin, like water. If it's thick like dish detergent the siphon won't be able to pick it up. You may also need to lift the chemical container to the same level or a little above the pressure washer to let gravity help you establish the siphon. Once it's started you should be able to put the chemical container back on the ground. If you keep losing the siphon, letting the container sit on a box to lift it a bit should help. If you should experience more problems we recommend you contact the manufacturer Pressure-Pro to diagnose the problem directly with you to find out what the problem is. They can be reached at 772-461-4486.
Please make sure you are using the black soap tip that came with your pressure washer.
We appreciate your business and apologize for any inconvenience.
Please make sure you are using the black soap tip that came with your pressure washer.
We appreciate your business and apologize for any inconvenience.
Dale V.
Power Equipment Expert
Rating Breakdown
3/5
1/5
1/5
1/5
Cons:
Unreliable
injector
By Andrew S.
Shirley, New York
Purchased 03/14/2017 |
Review Posted 04/29/2017
Didn't work had to buy another brand.
Andrew S. Does Not Recommend This
Was this review helpful?
Expert Response
This injector works by the Siphon method. Clicking on the link will take you to a short Wiki explanation of how a siphon works. To get the flow established you will need to make sure the soap is thin, like water. If it's thick like dish detergent the siphon won't be able to pick it up.
You may also need to lift the chemical container to the same level or a little above the pressure washer to let gravity help you establish the siphon. Once it's started you should be able to put the chemical container back on the ground. If you keep losing the siphon, letting the container sit on a box to lift it a bit should help.
Please make sure you are using the black soap tip that came with your pressure washer.
We appreciate your business, and apologize for any inconvenience.
You may also need to lift the chemical container to the same level or a little above the pressure washer to let gravity help you establish the siphon. Once it's started you should be able to put the chemical container back on the ground. If you keep losing the siphon, letting the container sit on a box to lift it a bit should help.
Please make sure you are using the black soap tip that came with your pressure washer.
We appreciate your business, and apologize for any inconvenience.
Dale V.
Power Equipment Expert
Rating Breakdown
1/5
1/5
1/5
1/5
Cons:
Unreliable
Quality Product
By Joel L.
Miller, Missouri
Purchased 10/10/2016 |
Review Posted 10/31/2016
This product really completed my pressure washer...don't know why it comes without this item.
This is a quality product.
This is a quality product.
Joel L. Recommends This
Was this review helpful?
Rating Breakdown
5/5
5/5
5/5
4/5
Pros:
Durable, Easy To Use, Fast, High Quality
Product Q&A
(9)
Product Questions
Answered by Jim, the Pressure Washer Expert
What pressure washer does this work with? I'm looking at a karcher k3 follow me since it was a pump.
Couple questions.
1. Does this siphon hose work well? Looks like it has good reviews.
2. Will this work with the k3 follow me? If so do you recommend this PW?
3. Any other pressure washer that can work with a suction hose? I need to pull from a still water source. Thinking of reliance hydroller.
Thanks
Patrick
from New Jersey
July 10, 2016
Does 20%fixed dillution mean 20:1 if not please explain
Michael Chace
from Massachusetts
July 07, 2016
Quick connect is what size for male and female
Marty Vodicka
from Missouri
July 05, 2016
I am looking to purchase a 3400 psi 2.5 gpm powerwasher. My old one quit. It would not supply chemical very far due to the low pressure on the chemical application side. Is there a chemical applicator that will go on the high side, on the output of the pump, so that I can reach those 2nd story walls? I noticed that this one is recommended for 3-5gpm. Will this one work on a 2.5gpm?
Robert
from Georgia
August 11, 2015
Does this attach to the end of the hose or directly to the discharge side of the pump?
Scott Haviland
from New York
May 19, 2015
What are the main advantages to having a high pressure chemical injector vs. low pressure. Is it just the dilution ratio? I have a Maxus 2500psi pressure washer are there any high pressure injectors that I can attach to the output of the pump?
Scott Haviland
from New York
May 17, 2015
How do you use the Injector. I am not getting any suction.
Franklin Sardina
from Florida
March 12, 2015
What is the minimum water flow required for this to siphon?
James
from Florida
June 02, 2014
I'm looking for a downstream low pressure injector with a ceramic ball thet is OK for chlorine bleach.Do you know of any?? Thanks.
Ralph Fowler
from Louisiana
April 02, 2011
How-To Articles
How to Use a Pressure Washer Chemical Injector
In a pinch, shaving with only water will work, but you might be left with razor ...
How to Pick the Perfect Replacement Hose
High-pressure hoses take a heck of a beating from the pressurized water they co...
Power Equipment How-To Library
Articles, Tips and Buying Guides from Our Experts
Ask A Question!
*Required Fields
+
Thank You For Submitting Your Question
Your submission has been sent successfully. Please give our experts up to two business days to respond.
Media Gallery
Pressure-Pro Low Pressure 4000 PSI Chemical Suction Injector
Customer Review Images
