Local Pickup FAQ's

Hover to zoom
1 of 2
Pressure-Pro Fully Plumbed CAT 67 DX 4000 PSI 4.0 GPM (1" Shaft) Triplex Pressure Washer Pump w/ Pulsar EZ Plumbing Kit
Model:
SLP67DX39-930
+
Share This Product
Recommended Accessories

Expert Recommended Accessories
Selected by Jim, our Expert
Optional Accessories
8
Model: AWA036-WS
$45.00
In-Stock
$78.00
In-Stock
$206.00
Only 4 In-Stock
Model: 17.0171
$14.00
Factory-Direct
Model: YR36K40
$60.99
Factory-Direct
Model: 2100306
$133.99
Factory-Direct
Model: PWD-ULTIMATEQCKIT
$27.99
Factory-Direct
Model: 348259
$32.00
In-Stock
Features
Grade
Professional
Style
Gas
Inflow
Garden Hose (Male)
Outflow
3/8" Snap Coupler (Male)
- Why Repair A Worn Out Pump?
- Fully Plumbed are ready to go - 4 bolts off - 4 bolts on
- Get a great quality replacement assembly for less than a repair
- CAT Brand Pump Kit Is Ready To Install
- Comes with unloader and pressure relief valve
- Pressure hose quick connect plug & garden hose inlet with filter
- Concentric Solid Ceramic Plungers
- Ceramic runs cooler, lasts longer; assures true wear surface
- Specially formulated seals deliver extended seal life
- Stacked Valve Design
- Makes servicing easy
- 1" Hollow-Shafted Pump
- Designed for direct mounting to gas engine
- Integral Pressure Unloader
- Standard built-in bypass controls pressure & protects the pump
- 1/4" Fixed Chemical Injector Hose Barb & Siphon Hose
- Allows addition of pressure washer safe soap to the water flow
- Be Sure To Measure The Shaft & Flange Bolt Holes Accurately!
- There is a 25% restock fee for returned pumps
- See the Owner's Manual (under the Specs tab) for dimensions
- Please Call Us For Sizing Assistance w/ Information Below:
- 1. Age of Pump and Model # (must be no more than 15-yrs old)
- 2. Is the pump Vertical or Horizontal
- 3. Shaft Size - 3/4", 7/8" (vertical ONLY), 1", or Belt Drive XXmm
- 4. Engine Brand and HP (model # if available would be helpful)
- ***Shaft Size Measurements Must Be Precise***
*Weather-Related Shipping Delay Notice* Please be advised that due to recent inclement weather, the facility is operating at limited capacity. PED has no control over lead times on pressure washer products coming out of Florida.
California residents see
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
For more information go to: www.p65Warnings.ca.gov
Specifications
SLP67DX39-930

General Information
Product Category
Pressure Washer Pumps
Overview
Product Category
Pressure Washer Pumps
Weight
17 Pounds
Consumer Warranty
2 Years
Product Length
11.5 Inches
Product Width
8.82 Inches
Product Height
7.99 Inches
Accessories
Pump Brand
CAT
Pump Type
Triplex Plunger
Shaft Size
1
Pump Design
Horizontal
Adjustable Pressure
Yes
Accessory Grade
Professional
Accessory Style
Gas
Inflow
Garden Hose (Male)
Outflow
3/8" Snap Coupler (Male)
Maximum GPM
Maximum GPM
Gallon per Minute
4
Rated PSI
4000 PSI
Chemical Injections
Siphon Tube
Reviews
(23)
Pressure-Pro SLP67DX39-930 Reviews & Ratings
Customer Rating
4.43
(23 Ratings)
5
(16)

4
(5)

3
(0)

2
(0)

1
(2)


Strong Pump
By Greg M.
Dothan, Alabama
Purchased 08/24/2021 |
Review Posted 10/05/2021
Easy to install and works great.
Greg M. Recommends This
Was this review helpful?
Rating Breakdown
4/5
4/5
5/5
4/5
Pros:
Id Buy It Again, Reliable, Easy To Use, Price

Cat Upgrade
By Keith S.
Franklin, Louisiana
Purchased 12/12/2018 |
Review Posted 07/05/2021
This pump was very easy to install. Fit was perfect. It makes really good pressure. Great upgrade from cheap washer pump.
Keith S. Recommends This
Was this review helpful?
Rating Breakdown
5/5
5/5
5/5
4/5
Pros:
Durable, Id Buy It Again, High Quality, Easy To Use

Very reliable pump
By Howard Young
Manhattan, Illinois
Purchased 06/29/2017 |
Review Posted 08/31/2017
Good dependable pump. We have had no problems with this pump.
Howard Young Recommends This
Was this review helpful?
Rating Breakdown
5/5
5/5
5/5
5/5
Pros:
Durable, I'd Buy It Again, Reliable, High Quality
Cons:
None

So Far, This A Piece Of Junk, The Pressure Of An Old Car Wash
By Bruce R
Houston, Texas
Purchased 05/16/2017 |
Review Posted 08/23/2017
I replaces a cat pump I had with this unit. Same motor, same rpms, same everything, but no pressure.
Bruce R Does Not Recommend This
Was this review helpful?
Expert Response
I'm sorry to hear about the issues you're experiencing with your unit. Please contact Pressure-Pro directly to resolve any issues. You can call them at: (772) 461-4486.
Thank you very much for your business and I hope you have a great day.
Thank you very much for your business and I hope you have a great day.

Dale V.
Power Equipment Expert
Rating Breakdown
1/5
1/5
1/5
1/5
Cons:
Low Quality, Unreliable

The Pump Works Great
By Howard Y.
Manhattan, Illinois
Purchased 06/29/2017 |
Review Posted 08/14/2017
Great pressure and draws water from a tank with no problems.
Howard Y. Recommends This
Was this review helpful?
Rating Breakdown
5/5
5/5
5/5
5/5
Pros:
Durable, I'd Buy It Again, Reliable, High Quality

This Pump Rocks
By Robert F.
Tampa, Florida
Purchased 12/06/2016 |
Review Posted 12/12/2016
Ordered this pump on Tuesday 12/05/16 and it was at my doorstep Friday 12/08/16.
The pump was easy to install--about ten minutes--and I was up and running. This pump is a quality piece and really puts out the pressure.
I would recommend this product to a friend. Pressure Washers Direct rocks !!!! Thank you.
The pump was easy to install--about ten minutes--and I was up and running. This pump is a quality piece and really puts out the pressure.
I would recommend this product to a friend. Pressure Washers Direct rocks !!!! Thank you.
Robert F. Recommends This
Was this review helpful?
Rating Breakdown
5/5
5/5
5/5
5/5
Pros:
Durable, I'd Buy It Again, High Quality, easy installation

Don't Buy This!!
By David Hoover
Ringgold, Georgia
Purchased 07/22/2016 |
Review Posted 08/10/2016
I unboxed my CAT 57DX4000 4G.P.M.@ 4000 PSI. pump, attached it to my Honda motor and within 5 minutes I had WHITE FOAM in the oil. I thought maybe it picked up moisture some how so I changed the oil replacing it with CAT pump oil. I ran it 10 minutes and it was foamy again.
Now i'm having a time getting shoved around about my exchange. Nobody seems to know what to do. It's simple! replace it or give me a full refund!
Now i'm having a time getting shoved around about my exchange. Nobody seems to know what to do. It's simple! replace it or give me a full refund!
David Hoover Does Not Recommend This
Was this review helpful?
Expert Response
I emailed our contact at Pressure-Pro yesterday asking them to get in touch with you directly. This is a little complex since CAT makes the pump but Pressure-Pro adds the plumbing.
If you haven't heard from the folks at Pressure-Pro please let us know so we can follow up with them.
If you haven't heard from the folks at Pressure-Pro please let us know so we can follow up with them.

Dale V.
Power Equipment Expert
Rating Breakdown
1/5
1/5
1/5
1/5

3800 PSI Idle Down Cable Will Not Fit
By Charles B.
Molino, Florida
Purchased 04/14/2016 |
Review Posted 05/09/2016
I ordered this pump to replace my 3800 psi Cat pump. It fits perfect, but idle down cable position is on opposite side of the pump. My cable is several inches too short. In addition, the fitting is larger on the 4000psi. All I need is the idle down cable that is on the Yamaha PW4040 pressure washer that you now sell. I can't even get a part number or the owners manual that comes with the PW4040.
If I could see the owners manual for the PW4040, the part will be on the schematic as it was with my unit. Mike has told me that I can return the unit for a full refund, but also said I can try to make it work. I have a couple of more sources to try and get the part number or the part itself.
If anyone who has access to the new Yamaha PW4040, which I believe has the exact pump you all sold me, could pull the owners manual out and look up idle down assembly for unit and part number and send It to me I would appreciate it very much. I appreciate you all giving me a chance to make the pump work. I know the idle down cable I need is out there, I just need to find who provides it and a part number. Cat pump and Yamaha have been little help.
Thanks for your time, I will be calling for a return authorization and call tag soon if sources fail.
If I could see the owners manual for the PW4040, the part will be on the schematic as it was with my unit. Mike has told me that I can return the unit for a full refund, but also said I can try to make it work. I have a couple of more sources to try and get the part number or the part itself.
If anyone who has access to the new Yamaha PW4040, which I believe has the exact pump you all sold me, could pull the owners manual out and look up idle down assembly for unit and part number and send It to me I would appreciate it very much. I appreciate you all giving me a chance to make the pump work. I know the idle down cable I need is out there, I just need to find who provides it and a part number. Cat pump and Yamaha have been little help.
Thanks for your time, I will be calling for a return authorization and call tag soon if sources fail.
Charles B. Does Not Recommend This
Was this review helpful?
Expert Response
We post Owner's Manuals when we can get them- I'm sorry that the folks at Yamaha Motor Sports don't make the manual available either to us, or on their website.
I used the link on our website to get to Yamaha's Service Locator.. It will show the closest repair locations to your zip code. They should be able to look up the parts list for the pressure washer and get the cable for you.
I used the link on our website to get to Yamaha's Service Locator.. It will show the closest repair locations to your zip code. They should be able to look up the parts list for the pressure washer and get the cable for you.

Dale V.
Power Equipment Expert
Rating Breakdown
4/5
4/5
4/5
4/5

Pump Broke
By Sean K.
Medina, Ohio
Purchased 04/04/2016 |
Review Posted 04/27/2016
Pump broke, the replacement came fast. 10 minutes to install and worked perfectly!!
Sean K. Recommends This
Was this review helpful?
Rating Breakdown
5/5
5/5
5/5
5/5

Good experience
By Paul C.
Bremerton, Washington
Purchased 08/03/2015 |
Review Posted 08/27/2015
I bolted the pump to my Honda 11HP motor and put the pressure gauge on and adjusted the pressure to not exceed 4k psi on release of the trigger. It quickly caused the motor to cough, hickup and almost stall out. It's too much pump for the 11 hp. I turned down the pressure to about 3200 psi and the motor is doing great. I will put the pump saver in the water side and change out the pump oil when I store it this winter. I might get the 13 hp to replace the 11 hp but maybe not. It was all I could do to handle 4 hours of working it before I was tired out. It was like trying to hold an angry snake with the long wand and its easier to use the 36" with a swivel and a 45 deg sweep nozzle.
Paul C. Recommends This
Was this review helpful?
Rating Breakdown
5/5
5/5
5/5
5/5
Product Q&A
(4)

Product Questions
Answered by Jim, the Pressure Washer Expert
I am looking for a pump to fit a Honda GX340 .
Dennis Lillrose
from Michigan
March 08, 2016
Will the cat dx 67 replace the cat 3000psi pump that came on my ridgid pressure washer as far as the flange bolting up the same?
Jeremy Davis
from West Virginia
August 18, 2014
the cat 67 dx I just bought 4000 psi pump ..I don't understand the purpose and how to adjust the black preloader adjustment knob..this expensive pump came with absolutely no manual or paperwork,kinda disappointed with my purchase..thats not right!!
James
from New York
May 26, 2014
Will this pump fit on a honda GX390 engine? The pump that is on it now is 3800psi 4gpm. Will this mount to motor?
Jeffrey
from Mississippi
March 19, 2013
How-To Articles
How To Pick The Perfect Replacement Pressure Washer Pump
If your pressure washer turns on, but won't pressurize water, don't give up on ...
How to Replace the Pump on a Pressure Washer
Pressure washer pumps can be burned out in many ways. It's more common than you...
Manuals
Ask A Question!
*Required Fields
+
Thank You For Submitting Your Question
Your submission has been sent successfully. Please give our experts up to two business days to respond.

Media Gallery
Pressure-Pro Fully Plumbed CAT 67 DX 4000 PSI 4.0 GPM (1" Shaft) Triplex Pressure Washer Pump w/ Pulsar EZ Plumbing Kit




Customer Review Images
