Hover to zoom

1 Of 5

Simpson Monster 50-Foot (3/8") 4500 PSI High Pressure Hose w/ Quick Connectors

Name: Simpson Monster 50-Foot (3/8") 4500 PSI High Pressure Hose w/ Quick Connectors
Brand: Simpson
SKU: 1412
Price: 84.99 USD
Availability: InStock

Model:

41028

Write A Review

$84.99

Free Shipping

In-Stock

Ships Monday, Nov 11th

Shipping to60601

Length

Simpson Monster 50-Foot (3/8") 4500 PSI High Pressure Hose w/ Quick Connectors

Model: 41028

$84.99

Accessories

Features

Specifications

Reviews

Product Q&A

How-To Articles

Expert Recommended Accessories Selected by Jim, our Expert

Required Accessories 9

These accessories are required to properly setup/install this product.

Optional Accessories 10

Features

Grade

Professional

Style

Gas

Inflow

3/8" Snap Coupler (Male)

Outflow

3/8" Snap Coupler (Female)

Simpson 50' Monster Extension / Replacement Hose
Perfect for homeowners and professionals to get the job done efficiently
Easy Connection
3/8" Male quick connect & 3/8" Female quick connect
Industry-standard quick connect socket and plug connectors
Quality Construction
Dual-braided construction of steel over polyester
Adds strength for long-lasting performance
Polyurethane outer jacket is flexible, non-marring & 3x more abrasion resistant than rubber
Works with Most Pressure Washers
Fits most gas pressure washers with 3/8" QC fittings & 4500 PSI
Will also fit electric pressure washers with 3/8" QC fittings
Great for most commercial and residential cold water pressure washers
Cold Water Compatible
Built for water temperatures up to 140 degrees Fahrenheit
Durability and Long Life
The polyurethane outer jacket wipes clean easily
4" bend protectors prevent wear & tear around the connectors
Product Image Disclaimer: "PED is not responsible for any variances from the product in the image and the item you purchase due to supply chain issues. Please review all product specs prior to purchase."

California residents see

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

For more information go to: www.p65Warnings.ca.gov

Specifications

41028

General Information

Product Category

Pressure Washer Accessories

Overview

Product Category

Pressure Washer Accessories

Weight

11 Pounds

Consumer Warranty

90 Days

Commercial Warranty

90 Days

Product Width

3/8 Inches

Product Height

3/8 Inches

Dimensions

50 Feet

UPC

879399000256

Additional Model Numbers

MH5038QC, 41028

Hose

Hose Length

50 Feet

Hose Material

Wire Reinforced

Hose Diameter

3/8 Inch

Hose Connections

Quick-Connect

Temperature

cold

Non-Marking

Yes

Accessories

Accessory Grade

Professional

Accessory Style

Gas

Inflow

3/8" Snap Coupler (Male)

Outflow

3/8" Snap Coupler (Female)

Rated PSI

4500 PSI

Reviews

(45)

Simpson 41028 Reviews & Ratings

Product Q&A

(13)

Product Questions Answered by Jim, the Pressure Washer Expert

I have an Excell Model XR2600-2600PSI. I want to buy a 100 foot extension hose with quick connects. The hose that came with it has 5/16 OEM markings on it. I have only been able to find 3/8 " hoses so far. Do you recommend that I stay with 5/16" and can you recommend one with quick connects? Thanks.

Tim

from North Carolina

July 03, 2016

Would this hose fit a Karcher G3200XH?

Steve Hunt

from Connecticut

July 02, 2016

Can you tell me the o-ring size for the connections with this hose. The ones on each end have deteriorated.

Rod Rodman

from Florida

January 23, 2016

Can you tell me the o-ring size for the connections with this hose. The ones on each end have deteriorated.

Rod Rodman

from Florida

January 23, 2016

My NON-MARKING hose is leaving marks!! Help?

Margaret Mulberry

from Illinois

October 17, 2014

Answer

Regarding non-marking leaving “marks” the non-marking hose jacket is a silicone rubber compound. When being used it does not permanently mark or staining the surface.

However all hoses, standard and non-marking blue and gray, when being dragged across a rough surface have small particles of the rubber outer cover abraded off. With non-marking hose there is no carbon black in the jacket material that stains or permanently marks the surface. The small particles of rubber jacket however will show and can collect in depressions on the surface or where rinse water is channeled by the hose itself or other equipment. These particles are easily rinsed away. High temperature operation softens the silicone rubber jacket material and causes the hose to abrade easier leaving more jacket material on the surface.

Standard black pressure washer hose is a different rubber compound that contains carbon black. When black hose is exposed to water, high temperatures and many common pressure washer chemicals the carbon black will leach out of the rubber jacket and permanently stain the surface.

Was this answer helpful?

Yes

can you get longer than 50ft or can you join two together

Chris

from New York

June 20, 2014

does it come with screw on ends, not quick connect

Alan

from

February 29, 2012

I have the DeWalt Professional 4200 PSI (Gas-Cold Water) Pressure Washer With Honda Engine Model DPW4240, Will this 4000PSI rated hose be safe to use with my 4200 PSI DeWalt washer? or should I purchase a high PSI rated hose? Thanks, Christopher

from

December 28, 2011

I have the Simpson MVS2700 and am interested in the 50 or 100 feet host. Is 3/8 the right size? It doesn't currently have quick connect, but has threaded fittings. Does the quick connect hose come with adapters at both the pressure washer AND nozzle ends?

Masaki

from Washington

July 16, 2011

Answer

For that size pressure washer, the best size hose would be a 5/16" diameter hose.

I am posting a link below to a hose that would work with your pressure washer and the current connections.

5/16" High Pressure Hose

In regards to the Simpson 3/8" hose, you could technically use this size hose but you will probably lose about 50-100 psi out of your machine. This hose does not come with the adapters for your pump and trigger gun. You would have to purchase those items seperately.

Thank you,

Pressure Washers Direct

Was this answer helpful?

Yes

I'm looking at purchasing the Maxus Model MX5223. Does the quick connect work with the simpson 50' 3/8" High-pressure monster hose?

Owen Harper

from Oklahoma

June 21, 2011

I just purchased the HD-2.5/30CH and now looking to upgrade to the 50' monster hose. How flexible is the hose compared to the one that came with my pressure washer? Also I see this comes with quick disconnects, so which ones will I need to purchase for my Karcher to make this hose work? Thanks

Mike G

from Wisconsin

June 05, 2011

Answer

The hose would be more flexible than the one that comes with the unit, but not real flexible because they do use steel brading for durability. It is however one of the better hoses we carry. If you are looking to change over to quick connects, you will need some adapters. The part numbers on the adapters you would need would be D10088 and D10037.

Thanks,

Pressure Washers Direct

Was this answer helpful?

Yes

hi, I'm trying to find a hose called Tuff Skin. Landa sells the hose and it's 3/8 inch 5800 psi hose very abrasion resistant, double wire, but they have thier name labled on the sleeve even though they don't make the hose. Do you know what hose I'm speaking of? and if so, do u sell them?

from Oregon

April 30, 2011

Bill I have a standard Troy Bilt Pressure sprayer , Honda Engine, etc from lowes. The plastic hose is always getting kinked up. Not at the ends but all througout the hose. Do you have a hose that is kink free???It is a 2400 PSI unit so how long of a hose can I put on and still have pressure. Thanks

Mike Brown

from Tennessee

April 05, 2011

Answer

With your pressure washer rating, you would be best off purchasing a 5/16" diameter hose versus a 3/8" size hose. When using an extension hose, you will lose 1 psi per linear foot that you extend the hose past its original length. In this case, if the pressure washer came with a 25' hose and you purchase a 50' hose, you will lose 25 psi of which would not be noticeable to you.

You can extend the high pressure hose as far as you want, just keep in mind the amount of pressure that will be lost as I stated above. However with your psi rating, the maximum length that I would recommend would be 100'.

I am posting a link below to a 5/16" hose that I would recommend for your pressure washer:

MTM Hydro 5/16" Hose

Was this answer helpful?

Yes