Power Equipment How-To Library
Articles, Tips and Buying Guides from Our Experts
Local Pickup FAQ's
+
Share This Product
Features
Swisher Commercial Pro ATV Spreader
Product Video Disclaimer: "PED is not responsible for any variances from the product in this video and the item you purchase. Please review all product specs prior to purchase."
- Commercial Pro ATV Spreader
- Evenly spread grass seed, fertilizer, salt, and sand easily and consistently
- Spread width is adjustable from 4 to 16 foot diameter
- Heavy-duty double ball bearing motor
- Frame mounted on/off switch
- 15 Gallon Opaque Poly Tank
- 150 lb. capacity
- Sealed lid design prevents unwanted moisture
- Spinner disc and vented cap designed to deliver a consistent flow
- Adjustable Feed Gate
- Control the flow rate with the operator accessible adjustable feed gate
- Universal Fit
- Mounts easily onto almost any ATV
Specifications
19920
General Information
Product Category
Spreader
Overview
Product Category
Spreader
Weight
41 Pounds
Consumer Warranty
1 Year
Product Length
27 Inches
Product Width
26.75 Inches
Product Height
28.25 Inches
UPC
728172401608
Reviews
(2)
Swisher 19920 Reviews & Ratings
Manufacturer Review
Helpful Tips for operating your Spreader
By Leslie
Swisher Product Expert
Review Posted 03/29/2016
• Read Owner’s Manual before use and be sure to follow all safety label precautions provided on the Spreader Hopper.
• Always use ONLY CLEAN DRY MATERIAL and be sure the remove all unused material from
the Hopper after each use. Damp materials will cause material flow problems and material
freezing problems in cold temperatures.
• Be sure material is free of foreign matter such as packaging etc.
• Some materials may jam the Hopper Gate at lower settings so it may be necessary to use a larger setting and increase your mph to compensate for the increased material flow rate. Increasing your ground speed from 4 mph to 8 mph will decrease your application rate per acre by half if the same setting is used at both speeds.
• Light seed such as Kentucky Blue Grass can be mixed with a seed such as clover to aid in material flow at a 50/50 mix.
• Increased material density per acre can be achieved by adjusting the Motor Assembly closer to the Deflector and Hopper Gate. This accomplishes a narrower spread width, providing more lbs/sq-ft of material.
• Do not spread light seed in windy conditions as poor coverage will result.
• Proper material coverage is achieved with the greatest satisfaction by covering the desired area twice at half the recommended application rate indicated by the manufacturer of the material. Once by traveling length ways then by traveling cross ways to account for any underlap issues. The adjustment of the application rate can be made either by adjusting the Hopper Gate to a lesser setting or by increasing the ground speed of the application vehicle.
• When using the Spreader for salt/ice melts, fertilizer or other corrosive materials it is imperative that the Spreader is thoroughly cleaned to prevent corrosion causing premature failure of the product.
• Always use ONLY CLEAN DRY MATERIAL and be sure the remove all unused material from
the Hopper after each use. Damp materials will cause material flow problems and material
freezing problems in cold temperatures.
• Be sure material is free of foreign matter such as packaging etc.
• Some materials may jam the Hopper Gate at lower settings so it may be necessary to use a larger setting and increase your mph to compensate for the increased material flow rate. Increasing your ground speed from 4 mph to 8 mph will decrease your application rate per acre by half if the same setting is used at both speeds.
• Light seed such as Kentucky Blue Grass can be mixed with a seed such as clover to aid in material flow at a 50/50 mix.
• Increased material density per acre can be achieved by adjusting the Motor Assembly closer to the Deflector and Hopper Gate. This accomplishes a narrower spread width, providing more lbs/sq-ft of material.
• Do not spread light seed in windy conditions as poor coverage will result.
• Proper material coverage is achieved with the greatest satisfaction by covering the desired area twice at half the recommended application rate indicated by the manufacturer of the material. Once by traveling length ways then by traveling cross ways to account for any underlap issues. The adjustment of the application rate can be made either by adjusting the Hopper Gate to a lesser setting or by increasing the ground speed of the application vehicle.
• When using the Spreader for salt/ice melts, fertilizer or other corrosive materials it is imperative that the Spreader is thoroughly cleaned to prevent corrosion causing premature failure of the product.
Was this review helpful?
Rating Breakdown
5/5
5/5
5/5
5/5
Didnt last 6 uses
By William P.
Bath, Michigan
Review Posted 03/26/2016
Corrosion wore right through main switch connection, all parts and other connections corroded, motor barely turns now when switch bypassed. Used for rock salt commercially.
Spreads salt but gets plugged up and doesn't spread accurately. Its either open or closed not much works in between. Hope they honor warranty not even 1 year yet. Not easy to mount will be a pain to remove in spring.
Spreads salt but gets plugged up and doesn't spread accurately. Its either open or closed not much works in between. Hope they honor warranty not even 1 year yet. Not easy to mount will be a pain to remove in spring.
William P. Does Not Recommend This
Was this review helpful?
Manufacturer Response
We are sorry to hear that you are having issues with your spreader. Here are some helpful hints when using the Swisher spreader.
• Always use ONLY CLEAN DRY MATERIAL and be sure the remove all unused material from
the Hopper after each use. Damp materials will cause material flow problems and material
freezing problems in cold temperatures.
• Some materials may jam the Hopper Gate at lower settings so it may be necessary to use a larger setting and increase your mph to compensate for the increased material flow rate. Increasing your ground speed from 4 mph to 8 mph will decrease your application rate per acre by half if the same setting is used at both speeds.
• When using the Spreader for salt/ice melts, fertilizer or other corrosive materials it is imperative that the Spreader is thoroughly cleaned to prevent corrosion causing premature failure of the product.
Since you aren't a verified buyer, we do not have your contact info. Please all us toll free at 800-222-8183 so we can assist.
• Always use ONLY CLEAN DRY MATERIAL and be sure the remove all unused material from
the Hopper after each use. Damp materials will cause material flow problems and material
freezing problems in cold temperatures.
• Some materials may jam the Hopper Gate at lower settings so it may be necessary to use a larger setting and increase your mph to compensate for the increased material flow rate. Increasing your ground speed from 4 mph to 8 mph will decrease your application rate per acre by half if the same setting is used at both speeds.
• When using the Spreader for salt/ice melts, fertilizer or other corrosive materials it is imperative that the Spreader is thoroughly cleaned to prevent corrosion causing premature failure of the product.
Since you aren't a verified buyer, we do not have your contact info. Please all us toll free at 800-222-8183 so we can assist.
Rating Breakdown
4/5
1/5
2/5
1/5
How-To Articles
Manuals
Ask A Question!
*Required Fields
+
Thank You For Submitting Your Question
Your submission has been sent successfully. Please give our experts up to two business days to respond.
Media Gallery
Swisher Commercial Pro ATV Spreader
Customer Review Images
