Hover to zoom

1 Of 5

Wayne WSS30Vn - 1/2 HP Combination Primary and Backup Sump Pump System

Name: Wayne WSS30Vn - 1/2 HP Combination Primary and Backup Sump Pump System
Brand: Wayne
SKU: 7283
Price: 579.00 USD
Availability: InStock
Rating: 4.84 (197 reviews)

Model:

WSS30VN

Write A Review

$579.00

Free Shipping

In-Stock

Ships Monday, Nov 25th

Shipping to60601

Wayne WSS30Vn - 1/2 HP Combination Primary and Backup Sump Pump System

Model: WSS30VN

$579.00

Accessories

Features

Specifications

Reviews

Product Q&A

How-To Articles

Manuals

Expert Recommended Accessories Selected by Jim, our Expert

Required Accessories 9

These accessories are required to properly setup/install this product.

Optional Accessories 10

Features

Style

Combo

GPH

5100 Gallons

Switch Type

Vertical

Wayne WSS30V 1/2 HP Combination Primary & Backup Sump Pump System
Assembled in the US with foreign and domestic parts
The Hardest Working Pumps, You'll Never Hear™
Energy efficient motors & engineered design provide an ultra quiet experience
Pre-Assembled and Pre-Plumbed Design For Easier Installation
Simple, drop-in installation; Includes new propritary diverter valve for even easier installation
Epoxy-Coated Steel & Cast Iron Construction (CDU800 - Primary Pump) W/ 8 foot Power Cord
Rugged, corrosion-resistant design provides long life in sump applications
1/2 HP, Thermally Protected 120V PCS Motor
Energy efficient, oil-filled design, for quiet operation and extend motor life
Integrated, Guard-Protected Vertical Float Switch w/ Solid Polypropylene Float
Prevents switch hang-ups from debris for reliable automatic operation
Tested to 1 million cycles*; For performance that lasts (Primary Pump)
Unique Top Suction Design w/ Glass Reinforced Polycarbonate Impeller
Reduces clogging & prevents air lock occurrences without the need for a "weep hole"
Upper/Lower Ball Bearings, Premium John Crane Carbon/Ceramic Shaft Seals
Sealed oil-bath engineering for increased lifespan and virtually silent operation
High-quality components helps prevent leaks and galvanic corrosion
Epoxy steel body and cast-iron base. (ESP25) w/ 6' Cord
Helps extend pump life in harsh sump basin conditions
Pumps 2900 gallons-per-hour @ 0' lift (or 1680 GPH @ 10')
Adjustable Reed Float Switch
Easily mounts at high water level in your sump basin
Automatically starts when your existing sump pump fails
Audible Alarm For Local Notification
Alarms sounds when high water even occurs and pump is running
12V Battery Charger w/ LED Indicator Light & Thermoplastic Battery Box
Smart charging technology for maximum battery efficiency
Provides real-time battery charge status
Requires (1) 12V Deep Cycle Battery (SOLD SEPARATELY)
Recommended for use with the WAYNE WSB1275, 75 AMP hr maintenance free battery
Battery Box (13" x 7" x 9") - Fits A Maximum Group 27 Size battery
*WAYNE Water Pumps Exceed an Average 1 Million Test Cycles (Primary Pump)
3-Year Limited Warranty
For Indoor Use Only

California residents see

Warning: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP) which is known to the State of California to cause Cancer.

For more information go to: www.p65Warnings.ca.gov

Specifications

WSS30VN

General Information

Product Category

Sump Pump

Base

Base Material

Cast Iron

Min Sump Basin Size

16 Inch

Motor

Voltage

120 Volt

Running Amps

Battery Included

Thermal Protection

Yes

Power Cord Length

8 Feet

Oil Free Motor

Pump

Housing Material

Cast Iron

Impeller Material

Plastic

Handles Solids

Float Type

Vertical Float

GPH @ 0 feet

5100

GPH @ 5 feet

4500

GPH @ 10 feet

3840

GPH @ 15 feet

3060

GPH @ 20 feet

2040

Backup GPH @ 0 feet

2900

Discharge Port Size

1-1/2 Inch

Check Valve Included

Yes

Float On

9 Inches

Float Off

4 Inches

Manual Override

Backup GPH @ 5 feet

2340

Backup GPH @ 10 feet

1680

Backup GPH @ 15 feet

600

Submersible

Yes

Engine

Horsepower

.5 HP

Overview

Product Category

Sump Pump

Weight

35 Pounds

Consumer Warranty

3 Years

UPC

040066218506

Additional Model Numbers

WSS30V, WSS30VN

Reviews

(197)

Wayne WSS30VN Reviews & Ratings

Product Q&A

(16)

Product Questions Answered by Jim, the Sump Pump Expert

What impacts the lifespan of the pump?

Mike

from Wisconsin

July 22, 2023

What is the minimum size basin that is needed for this pump? What are the dimensions of both pumps combined?

Zack

from Michigan

October 16, 2018

Is it possible to get a 3/4 horsepower sump pump and a combination battery backup pump?

Paul

from Illinois

April 18, 2018

Hi Jim. If I'm out of town and we have two storms a day apart, will the battery automatically recharge to be ready for the 2nd storm? Meaning I don't have to be present to manually intervene?

Lou P.

from Illinois

March 29, 2017

Is there a notification when the battery or pump fail, or the battery doesn't have enough of a charge?

Tom

from Wisconsin

March 21, 2017

Answer

The controller on this system will monitor backup pump operation and the charge on the battery and will sound an alarm if the backup pump activates or the battery charge gets low or fails to charge. If you are looking for a system to notify you via phone, the WSSM40V is the same system but with phone notification, and does require a land based phone network for that feature.

Was this answer helpful?

Yes

What are the dimensions of the battery box?

Mike H.

from Ohio

March 08, 2017

Does the backup pump require a weep hole? Also, will this unit cycles frequently in bad weather, and should I install a rubber boot?

Howard O.

from Indiana

February 26, 2017

Answer

The Wayne WSS30V combo system already includes check valves for both pumps so the weep hole is NOT required for either pump. All backup pump float switches are very similar and typically run anywhere from 10 to 20 seconds after the float has dropped to the original position, so this is usually not an issue. With this system, the backup pump will actually run for an additional 20-25 seconds. Installing a union or rubber boot somewhere along the discharge pipe is pretty common and it will definitely give you a point to access the system for maintenance and service, whenever needed.

Was this answer helpful?

Yes

What size battery is required. Does charger shut off when battery is fully charged (does it have overcharge protection)? Where is the main pump suction port? What activates the back up pump? What is the horsepower of the backup pump. If the main pump fails can it be replaced by any pump?

Darrel F

from Illinois

August 16, 2016

Answer

The recommended battery is the Wayne WSB1275 - Maintenance Free AGM Backup Sump Pump Battery (75 Amps) for the Wayne WSS30V - 1/2 HP Combination Primary and Backup Sump Pump System, however most any 12V, deep cycle, maintenance free AGM battery will work in the 75 amp or 100AH (amp hour) rating. The oversize battery case (included) will accommodate a 12-volt SLA battery (up to a 27-frame size).
Be certain that the area around the batteries is well ventilated. Before servicing the batteries, blow away gasses by waving a piece of cardboard near the batteries.

The control box has a DC charger designed to shorten the recharging time of your battery, and to prevent overcharging. In addition, the control box has
a time delay which keeps the pump from repeated, short cycles when it shuts off. The time delay feature will allow the pump to run 20-25 seconds after the switch reaches the off position.

The main pump suction on this pump is actually just above the base where the line of square holes surround that bottom section of the pump. This is what's known as a top-suction and will help prevent clogging of debris that might normally clog a bottom suction pump.

The backup pump is activated by a separate float switch that is set to activate a few inches higher than the main pump float switch.

Since most backup pumps are operating on DC 12V power, they do not have any HP rating. Rather, they are rated in GPH (gallons per hour). The backup pump in this system can pump a healthy 2300GPH at a 10 foot head which rivals many standard 1/3HP 120V operated primary or main sump pumps.

If the main pump should fail, it is recommended that you replace it with another Wayne CDU800 - 1/2 HP Cast Iron Submersible Sump Pump w/ Vertical Float Switch since all the piping and included check valve is already setup for that pump.
Of course, if you should decide to go with another pump, you could always separate the two pumps at a later date and go with the pump of your preference.

I would also suggest reading the WSS30V INSTALLATION MANUAL for more information on how this system operates and is installed.
If you have any other questions, please let me know.

Was this answer helpful?

Yes

If either pump should ever fail, can they be replaced in the unit? Or does the whole unit needed to be replaced?

Chris M

from New York

January 05, 2016

Jim. I have a 11 inch basin size. I am interested in a combination primary and back up sump system. What do you recommend. Price is not an issue. I am interested in Zoeller, Liberty, or Wayne or whatever you recommend. I dont think I can jackhammer out the basin if I had to, although I would love to.

Vito Ranieri

from Pennsylvania

June 21, 2015

How does the system determines that the primary pump is not keeping up? By water level? running time of the primary? Also, if the primary fails/breaks does the backup kicks in? Thanks

Edgardo

from Pennsylvania

May 17, 2014

Answer

Thank you for your interest in Sump Pumps Direct. Each pump has it's own float switch. The float switch for the battery backup pump is set a few inches higher than the float switch for the main pump. When the main or primary pump is having difficulty keeping up with demand, the water level will rise higher insider your sump basin, thus setting off the secondary or battery backup pump to assist. This process will take place whenever you have AC power available to the system. In the event of a power outage, the battery backup pump, will obviously be your only working pump.

Was this answer helpful?

Yes

Hi, could you tell me what the diameter and depth of the sump basin needs to be for the Wayne WSS30V - 1/2 HP Combination Primary and Backup Sump Pump System? Thanks.

Erica

from New York

February 26, 2014

Which is better, a battery back-up system or a water back-up system?

Linda L

from Kentucky

February 06, 2014

Answer

Depending on the water table in your area and the potential for flooding you could go either way. If your water removal needs are below average, you could elect to go with a low GPH rated battery backup sump pump or water powered backup. Please note that water powered systems will only work with a minimum of 20-40 PSI. They will not work if you draw your water from a well. The typical water powered system would provide between 300-1000GPH of pumping capacity. If you're in a little higher water table that the flooding potential is a bit higher, you may want to consider a battery backup system rated at between 1000-2300GPH. If the flooding potential and water table are very high, you might look at the systems rated at 2400GPM and higher. You should also check with your local municipality to make sure that they are allowed as some municipalities have outlawed them as they do waste water in a sense.

Was this answer helpful?

Yes

If the 120 v pump can't keep up it sounds as if the battery backup pump will kick in---but the units share a common pipe so how can you add water /flow to an already maxed out pipe?? Would this not just increase head pressure on the battery pump causing it to work even harder????

Mark F

from Wisconsin

April 10, 2013

Answer

Thank you for visiting Sump Pumps Direct. You bring up a very good and important point, Mark! Most primary (1/4HP - 1/2HP) and battery backup pumps discharge to a 1-1/2" discharge pipe and will be installed separately but due to the discharge system already in place, be piped or "Y'd" together. In MOST cases, the total pumping capacity by both pumps at the same time will be handled by that 1-1/2" discharge pipe and will not cause any extra stress or back-pressure on those pumps. That being said, for optimum performance of both pumps, they should be connected to separate discharge pipes. Again, that is not always possible. In cases of extreme high water tables and frequent possible flooding where high capacity pumps are required, you should definitely run a separate discharge pipe for each pump you have installed.

Was this answer helpful?

Yes

I'm looking to purchase the Wayne WSS30V Combo. The specs say there is a check valve in the unit. Can I still use the Watchdog Klunkless Check Valve as well?

Tim L

from Wisconsin

July 30, 2012

Is this Wayne WSS30V - 1/2 HP Combination Primary and Backup Sump Pump System an AC/DC system or a DC system? Also please let me know if I have this straight. An AC/DC system means that the backup pump can be called into use if the main system is overloaded. In a DC system the backup pump only gets called into service if there is a power failure on the first.

Bryce Brunswig

from Nebraska

April 29, 2012

Answer

The Wayne model WSS30V is a combination primary sump pump and battery backup sump pump. The primary pump will operate on 120 volts and the battery backup pump operates on 12 volts from the battery that is installed along with the system and will operate when there is a loss of power. The battery backup pump will also operate in the event the primary pump cannot handle the incoming water, but will operate using the battery power and NOT 120 volts.

Was this answer helpful?

Yes