How to Pick the Perfect Compressed Air Dryer
Ever heard the saying an ounce of prevention is worth a pound of cure? Well, if...
Local Pickup FAQ's
Hover to zoom
1 of 1
Primefit PCKIT26 1/2-Inch 100-FT Nylon Tubing Compressed Air Piping System
Model:
PCKIT26
+
Share This Product
Recommended Accessories
Expert Recommended Accessories
Selected by Melissa, our Expert
Optional Accessories
7
$8.99
$14.99
Factory-Direct
Model: HYP380502-O
$27.99
Factory-Direct
$6.99
Factory-Direct
$6.99
Factory-Direct
$19.99
Factory-Direct
$19.99
Factory-Direct
Features
- Primefit 26-Piece Air Push To Connect Kit
- Perfect for any homeowner application with all the accessories needed to complete your ultimate garage
- Complete Air Flow System
- Provides a convenient solution to ensuring your air connections are off the floor and creating a safer environment free of tripping or falling
- Maximum Working Pressure 150 PSI
- TPEE tubing offers excellent flexibility and strength
- Kit Includes:
- (1) 1/2" 100-Ft Nylon Tubing (2) Outlet Blocks, (1) Manifold/Splitter, (2) 3/8-Inch NPT Ball Valve, (2) 3/8-Inch NPT Ball Valve
- 1-Year Limited Warranty
California residents see
Warning: This product can expose you to chemicals including Lead which is known to the State of California to cause Developmental Harm.
For more information go to: www.p65Warnings.ca.gov
Specifications
PCKIT26
General Information
Product Category
Air Compressor Accessories
Air Tools
Max Tool PSI
150
Overview
Product Category
Air Compressor Accessories
Consumer Warranty
1 Year
UPC
816227016621
Reviews
(4)
Primefit PCKIT26 Reviews & Ratings
Air Line
By Dale K
North Dakota
Purchased 02/17/2023 |
Review Posted 04/12/2023
It was easy to put together & easy to get back apart if needed. So far I like it.
Dale K Recommends This
Was this review helpful?
Rating Breakdown
5/5
5/5
5/5
5/5
Pros:
Easy To Use, Price, I'd Buy It Again, Easy To Store
Cons:
None
Happy With The Product
By Ben S
California
Review Posted 07/08/2022
Extremely pleased with the ease of installation however some hose clamps to clamp the piping to the wall would add to the kit.
Ben S Recommends This
Was this review helpful?
Rating Breakdown
3/5
5/5
5/5
5/5
Pros:
Easy To Use, I'd Buy It Again
A Solid Starter Kit For Your Air Distribution Network
By James K.
Worcester, Massachusetts
Purchased 03/21/2021 |
Review Posted 04/29/2021
Overall, this kit made a very nice setup, providing three connection points for air access from my compressor. In particular,
- The air blocks are solid, with mounting holes to screw to an appropriate surface. They have the rigidity and strength to put up with the abuse associated with connecting and disconnecting pressurized quick connects.
- The included conduit cutter did a surprisingly good job -- it easily made a very clean cut
- The push-in fittings are easy to use, and I haven't had leakage issues.
However, I have a series of minor complaints/warnings:
- The push-in fittings are relatively easy to break if you drop them -- I had one hit the floor wrong and shattered a good portion of the release rim
- The size of the blocks, and the push-in fittings, just *barely* fit flush. Obviously, the hex body of the fittings needs to be aligned with the blocks, but even the slightly elliptical push-in fitting needs to be with the short side facing the wall. Otherwise, when you tighten it down, it'll get stuck against the wall, and you can't push it in to release the fitting.
- There weren't quite enough 3/8NPT plugs in the kit for my use. It comes with three, which is enough to plug the back of each block if you're using it in 1/4" mode. However, that still leaves the top and bottom open. One or both will get tubing.. but that still left me needing a couple more. You can use the ball valves as plugs, I guess, but I wanted those to be able to split the system in half.
- The plugs that came with the kit didn't screw in deep enough to be flush. For one case, I ground it flush. Once I realized I needed to buy more plugs anyway, I got some more, and they were thinner (and thus didn't stick out when screwed all the way in)
- There were a bunch of T's, Elbows, and some random NPT fittings I didn't need/use. There weren't *any* straight couplers though, which was a little weird.
All in all, it's a great kit, and the core pieces (blocks, tubing, push-in fittings) do a good job. You'll just probably want to buy some ancillary fittings as well.
- The air blocks are solid, with mounting holes to screw to an appropriate surface. They have the rigidity and strength to put up with the abuse associated with connecting and disconnecting pressurized quick connects.
- The included conduit cutter did a surprisingly good job -- it easily made a very clean cut
- The push-in fittings are easy to use, and I haven't had leakage issues.
However, I have a series of minor complaints/warnings:
- The push-in fittings are relatively easy to break if you drop them -- I had one hit the floor wrong and shattered a good portion of the release rim
- The size of the blocks, and the push-in fittings, just *barely* fit flush. Obviously, the hex body of the fittings needs to be aligned with the blocks, but even the slightly elliptical push-in fitting needs to be with the short side facing the wall. Otherwise, when you tighten it down, it'll get stuck against the wall, and you can't push it in to release the fitting.
- There weren't quite enough 3/8NPT plugs in the kit for my use. It comes with three, which is enough to plug the back of each block if you're using it in 1/4" mode. However, that still leaves the top and bottom open. One or both will get tubing.. but that still left me needing a couple more. You can use the ball valves as plugs, I guess, but I wanted those to be able to split the system in half.
- The plugs that came with the kit didn't screw in deep enough to be flush. For one case, I ground it flush. Once I realized I needed to buy more plugs anyway, I got some more, and they were thinner (and thus didn't stick out when screwed all the way in)
- There were a bunch of T's, Elbows, and some random NPT fittings I didn't need/use. There weren't *any* straight couplers though, which was a little weird.
All in all, it's a great kit, and the core pieces (blocks, tubing, push-in fittings) do a good job. You'll just probably want to buy some ancillary fittings as well.
James K. Recommends This
Was this review helpful?
Rating Breakdown
4/5
4/5
5/5
5/5
Pros:
Easy To Use, Exceeded Expectations, High Quality, Id Buy It Again
Cons:
Could use a better fitting selection
I Feared A Nightmare But Woke To A Dream
By Richard N.
Bishop, California
Purchased 07/07/2020 |
Review Posted 08/04/2020
Thinking I had to use metal pipe I faced an uncertain future involving long working hours and days of frustration...all of life changed in a flash when I came upon this product. Works great and far easier to install than I could have imagined.
Richard N. Recommends This
Was this review helpful?
Rating Breakdown
5/5
5/5
5/5
5/5
Pros:
Easy To Use, Exceeded Expectations, Fast, Id Buy It Again
Product Q&A
(1)
Product Questions
Answered by Melissa, the Air Compressor Expert
Is this 1/2" ID or OD?
Howard J.
from Texas
February 01, 2020
How-To Articles
What an Air Line Filter is and How it Works
Without an air line filter - water, oil, and dirt can cause major damage to pne...
How to Pick the Perfect Air Line Filter
Air line filters extend the life of your compressor and improve the quality of ...
Power Equipment How-To Library
Articles, Tips and Buying Guides from Our Experts
Ask A Question!
*Required Fields
+
Thank You For Submitting Your Question
Your submission has been sent successfully. Please give our experts up to two business days to respond.
Media Gallery
Primefit PCKIT26 1/2-Inch 100-FT Nylon Tubing Compressed Air Piping System
Customer Review Images
