Local Pickup FAQ's
Hover to zoom
1 of 6
R1 CCR100 Compressor Controller For Single Stage & 2-Stage Air Compressors
Model:
CCR100
+
Share This Product
Recommended Accessories
Expert Recommended Accessories
Selected by Melissa, our Expert
Required Accessories
9
These accessories are required to properly setup/install this product.
Optional Accessories
10
Features
R1 CCR100 Compressor Controller For Single Stage & 2-Stage Air Compressors
Product Video Disclaimer: "PED is not responsible for any variances from the product in this video and the item you purchase. Please review all product specs prior to purchase."
- Intelligent Moisture Control
- Calculates condensate formation in real time based on environmental conditions during pumping for awareness on when to drain
- Drains only the condensate when present, preventing unnecessary air waste/pump cycling
- Compressor Pump Smart Start
- Reduces startup current by as much as 20%, lowering demand charges
- Prevents high humidity air intake
- Guards against air/oil contamination
- Air-Line Rupture Detection
- Continuously monitors and alters for air leaks
- Detects air-line rupture
- Stops pump and signals to prevent over-cycling and burnout
- Automatic Overheat Protection
- Detects when pump is overworked and overheated in operation
- Preventatively stops the pump operation to prevent failure
- Digital Management Of Pressure Band Gap
- Digitally maintains pressure band gap
- Maintains pressure band gap through all environmental conditions
- Compressed Air Usage Meter
- Maintains lifetime pump cycle counter for number of total cycles since installation
- Maintains lifetime hour counter for number of total hours of pump operation since installation
- Compressor-City: Linking Multiple Compressors Together
- Seamless interconnection of multiple reciprocating compressors of different types, sizes and brands as a single system
- Automatically prepares and ramps up assets up or down based on air demand
- Offers optimal energy footprint during transition without human interaction
- The R1 Simplex Standard Kit includes:
- 1x: R1 Single Compressor Controller
- 1x: Pressure sensor 1/4
- 1x: Temperature / humidity sensor
- 1x: Compressor temperature bolt-on sensor
- 1x: Buzzer
- 1x: Power supply 12v out / 95 - 277vac in
- R1 CCR100 Only Compatible with Single & 2-Stage Air Compressors
The Compressor Controller is a state-of-the-art machine learning control system for reciprocating air compressors that automates operation and saves thousands of dollars in lifetime operating costs while delivering better air quality. With a flexible form factor, it is easily adaptable to almost any reciprocating air compressor. It combines Real-Time environmental and operational sensing into a model that drives the control of the compressor which immediately improves operation to continuous peak performance, self-adjusting in real time to the changing environmental conditions for the ultimate in work consistency.
California residents see
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm..
For more information go to: www.p65Warnings.ca.gov
Specifications
CCR100
General Information
Product Category
Air Compressor Maintenance Kits
Overview
Product Category
Air Compressor Maintenance Kits
Weight
1.5 Pounds
Consumer Warranty
1 Year
Product Length
2.3 Inches
Product Width
7.1 Inches
Product Height
5.4 Inches
Additional Model Numbers
R1SIMPLEX, CCR100
Reviews
(1)
SAM Controllers CCR100 Reviews & Ratings
Verified Buyer
Company And Product Needs Improving
By Keith S.
Great Mills, Maryland
Purchased 02/06/2020 |
Review Posted 04/15/2020
It is a decent product. However, it doesn't tell you that you need to purchase another 3-500 dollars in materials to make it happen. There is no mention of that when you purchase it. You need to buy 2 electrical valves, an enclosure for the controller and various electrical fittings and parts.
They should also have a controller for a non/dryer unit and a refrigerated dryer unit(the compressor)..............they don't. The algorithm blows off your drain line at regular intervals. But it should be different based on cooled/dried and non/cooled and dryer units. Because the dryer units are already removing a large quantity of water from your system. I am losing a lot of air because it is draining more than it needs to due to the fact that I am chilling my air before it enters my tank. My chiller has a condensate tank and pump to expel that water before it enters my tanks. That means my compressor runs more often because it drains excessively.
As for the company, they are hard to get a hold of, and then don't answer questions. My unit didn't come with a manual. It came with a zerox copy of the install pages. I had to pull teeth to get someone to answer me, and then I had to look it up as a pdf. For 500 bucks, there should be a hard copy given with it. So, they promise you the world, give you the minimum and are very hard to contact.
No, I will never recommend them unless they make some changes to customer support and their product.
They should also have a controller for a non/dryer unit and a refrigerated dryer unit(the compressor)..............they don't. The algorithm blows off your drain line at regular intervals. But it should be different based on cooled/dried and non/cooled and dryer units. Because the dryer units are already removing a large quantity of water from your system. I am losing a lot of air because it is draining more than it needs to due to the fact that I am chilling my air before it enters my tank. My chiller has a condensate tank and pump to expel that water before it enters my tanks. That means my compressor runs more often because it drains excessively.
As for the company, they are hard to get a hold of, and then don't answer questions. My unit didn't come with a manual. It came with a zerox copy of the install pages. I had to pull teeth to get someone to answer me, and then I had to look it up as a pdf. For 500 bucks, there should be a hard copy given with it. So, they promise you the world, give you the minimum and are very hard to contact.
No, I will never recommend them unless they make some changes to customer support and their product.
Keith S. Does Not Recommend This
Was this review helpful?
Expert Response
First and foremost thank you for your purchase of the R1 CCR100 Compressor Controller and the informative review. We apologize for the issues you had with setting up the controller. We will forward your review to the manufacturer so they are informed of the issues you experienced.
Please accept our apologies for your disappointment and inconvenience!
Please accept our apologies for your disappointment and inconvenience!
Dale V.
Power Equipment Expert
Rating Breakdown
4/5
4/5
2/5
1/5
Pros:
Features
Cons:
Bad Instructions, Expensive, Need to buy allot more
Product Q&A
Be the First to Ask A Question
Answered by Melissa, the Air Compressor Expert
How-To Articles
How to Pick the Perfect Compressed Air Dryer
Ever heard the saying an ounce of prevention is worth a pound of cure? Well, if...
What an Air Line Filter is and How it Works
Without an air line filter - water, oil, and dirt can cause major damage to pne...
How to Pick the Perfect Air Line Filter
Air line filters extend the life of your compressor and improve the quality of ...
Manuals
Ask A Question!
*Required Fields
+
Thank You For Submitting Your Question
Your submission has been sent successfully. Please give our experts up to two business days to respond.
Media Gallery
R1 CCR100 Compressor Controller For Single Stage & 2-Stage Air Compressors
Customer Review Images