How To Pick The Perfect Pedestal Sump Pump
Pedestal sump pumps sit on a pedestal that keeps them out of the water. Unlike ...
Local Pickup FAQ's
Hover to zoom
1 of 2
iON 3/4 HP Cast Iron Stainless Steel Sump Pump w/ Digital Level Control HP20159
Model:
BA-75I
+
Share This Product
Similar Products
$289.00
$1,431.00
$999.00
Recommended Accessories
Expert Recommended Accessories
Selected by Jim, our Expert
Optional Accessories
19
$2,005.00
Factory-Direct
Model: MPPIII
$1,386.00
Factory-Direct
Model: LS-ALM-120V-US-RETAIL
$99.99
Level Sense Pro - Sump Pump High Water Alarm, Wi-Fi Enabled, Temperature, Humidity, & Leak Detection
Model: LS-PRO-120V-WIFI
$199.99
Model: FR1
$16.99
In-Stock
Model: FR1K-SCH40
$23.99
Only 2 In-Stock
$19.99
Only 5 In-Stock
Model: LWD1
$38.99
In-Stock
Model: CW2016
$9.99
In-Stock
Model: SPS
$12.99
In-Stock
Model: E2-2200
$59.99
In-Stock
Model: E-C18EWSF
$33.99
In-Stock
Model: 30-0043
$52.00
In-Stock
Model: 30-0048
$48.00
In-Stock
$60.00
In-Stock
Model: INP20306
$222.00
Factory-Direct
Model: MET20361
$2,238.00
Factory-Direct
Model: MI20106+P20397
$1,328.00
Factory-Direct
Model: IN-SPB1-1
$8.00
Factory-Direct
Features
Style
Primary
GPH
5100 Gallons
Switch Type
Ion
- Powerful & Efficient Submersible Pump
- Ideal for heavy-duty sump applications
- Cast Iron Stainless Steel Construction
- Ensures years of reliable operation
- Thermally Protected Motor
- reduces overheating
- Cast Iron Impeller
- Offers reliable pumping
- Stainless Steel Screened Intake
- Prevents debris from entering the pump
- Poly Resin Top Cap and Handle
- Made for easy installation and maintenance
- Ion Digital Level Control w/ 6" Range
- Eliminates moving parts associated with 98% of switch failures
- Attaches to discharge pipe for customized installation
- *Note - (IN-SPB1-1) Required For Mounting Sensor On Pipe
- 20' Cord
- Min sump pump basin size 18" X 24"
Specifications
BA-75I
General Information
Product Category
Sump Pump
Base
Base Material
Cast Iron
Min Sump Basin Size
18 Inch
Motor
Voltage
120 Volt
Running Amps
7.7
Thermal Protection
Yes
Power Cord Length
20 Feet
Oil Free Motor
No
Starting Amps
20.4
Pump
Housing Material
Stainless Steel
Impeller Material
Cast Iron
Solids Handling Size
0.5 inch
Handles Solids
Yes
Float Type
Ion Sensor
GPH @ 0 feet
5100
GPH @ 5 feet
4800
GPH @ 10 feet
4440
GPH @ 15 feet
4080
GPH @ 20 feet
3600
Discharge Port Size
2 Inch
Check Valve Included
No
Manual Override
Yes
Submersible
Yes
Engine
Horsepower
.75 HP
Overview
Product Category
Sump Pump
Weight
31 Pounds
Consumer Warranty
3 Years
Product Length
8.75 Inches
Product Width
5.75 Inches
Product Height
14.5 Inches
UPC
6482605855942
Reviews
(3)
iON Products BA-75I Reviews & Ratings
Longest Lasting Pump
By Harold V.
MILLTOWN, New Jersey
Purchased 05/04/2019 |
Review Posted 05/27/2019
I have been having basement pumps since house was built in 1970. Apparently sitting on a spring. I would have pump failure usually within a couple of years. In 2010, my basement waterproofing company finally installed this model pump under their name, followed by a second one for my other sump in 2011. Up until then, I had been buying their 3 year extended warranty and having them constantly replace inoperative pumps. These new pumps outlasted my 3 year warranty and I think they finally have a winner pump. I did not renew the expired warranty in 2014 and have had the pumps in constant use until now, 2019.
During those years, I have only had to take them outside once to open and clear build-up of silt-rust. Research has determined that the waterproof company is apparently re-labeling the BA-75I. My main pump runs every 20 to 60 seconds and, after almost 9 years is sounding like a bearing problem and low output. My research brought me to the BA 75I, which I just received and swapped out both, by the way are identical with exception of labeling. I can not stress how happy I was to finally have pumps that lasted more than a year!
During those years, I have only had to take them outside once to open and clear build-up of silt-rust. Research has determined that the waterproof company is apparently re-labeling the BA-75I. My main pump runs every 20 to 60 seconds and, after almost 9 years is sounding like a bearing problem and low output. My research brought me to the BA 75I, which I just received and swapped out both, by the way are identical with exception of labeling. I can not stress how happy I was to finally have pumps that lasted more than a year!
Harold V. Recommends This
Was this review helpful?
Rating Breakdown
5/5
5/5
5/5
5/5
Pros:
I'd Buy It Again, High Quality, Durable, Reliable
Cons:
Heavy, Expensive
My Perfect Replacement Pump
By Richard A.
Killingworth, Connecticut
Purchased 12/03/2018 |
Review Posted 01/14/2019
I’ve had my sump system (first ever) since 2012. This is the pump the company I hired installed (although they slapped their own label on it and called it something else) and it has worked flawlessly for 6 1/2 years. Well, almost flawlessly. The only hiccup was a single instance last September when it developed a vapor lock and failed to pump. The result was a minor flood before discovered. All I had to do was unplug it and plug it back in. Problem solved. That incident got me thinking I should at least have a backup pump on hand just in case. This pump is my hands down choice. Quiet and powerful. If the original ever really fails I will happily replace it with this (same) pump. I highly recommend it. (PS: I’ve since hired another company to come install a second, connected sump well with a pair of 1/2 hp pumps, providing my basement with a triple redundancy for peace of mind).
Richard A. Recommends This
Was this review helpful?
Rating Breakdown
5/5
5/5
5/5
5/5
Pros:
Durable, Quiet, High Quality, I'd Buy It Again
Excellent Pump For Those Who Need To Move A Lot Of Water!
By Joshua K.
Cicero, Indiana
Purchased 02/19/2016 |
Review Posted 03/15/2016
I bought this pump because I needed a very efficient and powerful pump. The water table is very high in my area, and during the Spring I am pumping about once every hour. This pump is very powerful, and can move a large volume of water without issue. It was much easier to install as far as having very good threads on the housing compared to my last pump. It did take some experimentation to get the sensor set at my desired height, but it is very easy to adjust. Overall, this is a very nice pump, which is very quite compared to my last pump, and also seems to be very well made. I definitely recommend it.
Joshua K. Recommends This
Was this review helpful?
Rating Breakdown
5/5
5/5
5/5
5/5
Pros:
Quiet, Exceeded Expectations, High Quality, I'd Buy It Again
Product Q&A
(3)
Product Questions
Answered by Jim, the Sump Pump Expert
Does a weep hole need to be made with this unit tp prevent air lock.
Dan G
from New Jersey
April 03, 2012
Is the Storm Pro Ba33m 1/3 HP UL inspected?
Gregory Speicher
from Pennsylvania
January 28, 2012
How does the sump pump connect to the independent float switch, Does the pump plug into the switch and the switch plugs into the power?
Mark
from New Jersey
February 09, 2011
How-To Articles
Introducing Goulds Pumps
Born, raised, and built in the U.S.A., Goulds Water Technology is an American m...
How To Pick The Perfect Submersible Sump Pump
Submersible sump pumps are the preferred choice for most residential applicatio...
Power Equipment How-To Library
Articles, Tips and Buying Guides from Our Experts
Manuals
Top Sellers in Category
Currently Viewing
iON 34 HP Cast Iron Stainless Steel Sump Pump w Digital Level Control HP20159
$604.00
Ask A Question!
*Required Fields
+
Thank You For Submitting Your Question
Your submission has been sent successfully. Please give our experts up to two business days to respond.
Media Gallery
iON 3/4 HP Cast Iron Stainless Steel Sump Pump w/ Digital Level Control HP20159
Customer Review Images
